The air cooled and water cooled camera housing are all made of dual-stainless steel, are very suitable to all kinds of CCD camera and integrative camera. Camera is fixed on the inside mounting baseplate, all connecting wire are at the back cap. Cooling water and cooling air wet through the inner layer to protect the high temperature damage, and cooled the camera housing. The compressure air will form a air curtain to protect dust erosion at the front cap.
Name
Air cooled
Camera housing
Water cooled
Camera housing
Votex cooled
Camera housing
Stainless
camera housing
Model
BYFC-01
BYFC-02
BYSC-01
BYSC-02
BYOL-01
BYOL-02
BYSN-01
BYSN-02
Size
Ø133x320
Ø133x320
Ø133x320
Ø133x320
Ø133x320
Ø133x320
Ø114x320
Ø120x320
Temperature
≤80°C
≤100°C
≤120°C
≤150°C
≤300°C
≤350°C
≤60°C
≤60°C
Dust concentration
≤200mg/m³
≤200mg/m³
≤200mg/m³
≤200mg/m³
≤200mg/m³
≤200mg/m³
Air temperature
≤35°C
≤35°C
≤35°C
≤35°C
≤35°C
≤35°C
Air pressure
0.1-0.2MPa
0.1-0.2MPa
0.1-0.2MPa
0.1-0.2MPa
0.4-0.7MPa
0.4-0.7MPa
Cooling water temperature
≤35°C
≤35°C
≤35°C
≤35°C
Cooling water flow
≥0.3-0.6m³/h
≥0.3-0.6m³/h
Mobile
